Wedge anchor KDK - steel, galvanized

Wedge anchor KDK, galvanized or hot-dip galvanized * and in stainless steel A4, with European approval for cracked and non-cracked concrete.

How it works: The wedge anchor is hammered into the borehole, with the expansion clip resting against the borehole wall due to its internal stress. When the nut is tightened, the cone pulls into the expansion clip, spreads it and presses it against the building material.

Areas of application: The wedge anchor is suitable for push-through installation for angle profiles, rails, consoles, wooden beams and facade substructures, among other things.

Properties: - Little drilling effort - Quick assembly - Ideal for push-through assembly

* ETA-14/0269, option 7, non-cracked concrete

Product	Art.-No.	Clamping range	Length	Drill Ø x depth	Torque moment	Thread	Qty
		[mm]	[mm]	[mm]	[Nm]	[mm]
KDK 6x40*	801 06 000	5	40	6 x 35	7	M 6 x 18	100/800
KDK 6-15/65*	801 06 015	15	65	6 x 50	7	M 6 x 28	100/800
KDK 6-50/100*	801 06 050	50	100	6 x 50	7	M 6 x 28	100/500
KDK 8-5/50*	801 08 000	5	50	8 x 45	15	M 8 x 22	100/500
KDK 8-10/75	801 08 010	10	75	8 x 65	15	M 8 x 40	50/400
KDK 8-15/80	801 08 015	15	80	8 x 65	15	M 8 x 40	50/400
KDK 8-20/85	801 08 020	20	85	8 x 65	15	M 8 x 40	50/400
KDK 8-30/95	801 08 030	30	95	8 x 65	15	M 8 x 55	50/400
KDK 8-45/110	801 08 045	45	110	8 x 65	15	M 8 x 60	50/250
KDK 8-85/150	801 08 085	85	150	8 x 65	15	M 8 x 75	50/250
KDK 10-10/60*	801 10 000	10	60	10 x 60	30	M 10 x 25	50/250
KDK 10-10/80	801 10 010	10	80	10 x 70	30	M 10 x 40	50/250
KDK 10-15/85	801 10 015	15	85	10 x 70	30	M 10 x 40	50/250
KDK 10-20/90	801 10 020	20	90	10 x 70	30	M 10 x 50	25/200
KDK 10-30/100	801 10 030	30	100	10 x 70	30	M 10 x 50	25/200
KDK 10-45/115	801 10 045	45	115	10 x 70	30	M 10 x 60	25/200
KDK 10-70/140	801 10 070	70	140	10 x 70	30	M 10 x 75	25/125
KDK 10-100/170	801 10 100	100	170	10 x 70	30	M 10 x 100	25/125
KDK 10-140/210	801 10 140	140	210	10 x 70	30	M 10 x 100	25/125
KDK 12-5/75*	801 12 005	5	75	12 x 70	50	M 12 x 35	25/200
KDK 12-10/95	801 12 010	10	95	12 x 90	50	M 12 x 50	25/125
KDK 12-15/110	801 12 015	15	110	12 x 90	50	M 12 x 50	25/125
KDK 12-20/115	801 12 020	20	115	12 x 90	50	M 12 x 65	25/125
KDK 12-30/125	801 12 030	30	125	12 x 90	50	M 12 x 80	25/125
KDK 12-50/145	801 12 050	50	145	12 x 90	50	M 12 x 80	25/125
KDK 12-65/160	801 12 065	65	160	12 x 90	50	M 12 x 80	25/75
KDK 12-85/180	801 12 085	85	180	12 x 90	50	M 12 x 100	25/75
KDK 12-105/200	801 12 105	105	200	12 x 90	50	M 12 x 100	20/80
KDK 12-125/220	801 12 125	125	220	12 x 90	50	M 12 x 120	15/60
KDK 12-145/240	801 12 145	145	240	12 x 90	50	M 12 x 120	15/60
KDK 12-160/255	801 12 160	160	255	12 x 90	50	M 12 x 120	15/60
KDK 12-190/285	801 12 190	190	285	12 x 90	50	M 12 x 120	10/60
KDK 12-230/325	801 12 230	230	325	12 x 90	50	M 12 x 120	10/40
KDK 12-260/355	801 12 260	260	355	12 x 90	50	M 12 x 120	10/40
KDK 16-15/115	801 16 015	15	115	16 x 110	100	M 16 x 60	20/60
KDK 16-30/145	801 16 030	30	145	16 x 110	100	M 16 x 80	10/50
KDK 16-45/160	801 16 045	45	160	16 x 110	100	M 16 x 80	10/50
KDK 16-80/195	801 16 080	80	195	16 x 110	100	M 16 x 80	10/50
KDK 16-100/215	801 16 100	100	215	16 x 110	100	M 16 x 120	10/50
KDK 16-130/245	801 16 130	130	245	16 x 110	100	M 16 x 120	5/40
KDK 16-165/280	801 16 165	165	280	16 x 110	100	M 16 x 120	5/30
KDK 16-200/315	801 16 200	200	315	16 x 110	100	M 16 x 120	5/30
KDK 20-5/145*	801 20 005	5	145	20 x 130	200	M 20 x 70	5/40
KDK 20-35/180*	801 20 035	35	180	20 x 130	200	M 20 x 70	5/25
KDK 20-60/205*	801 20 060	60	205	20 x 130	200	M 20 x 70	5/25
KDK 20-95/240*	801 20 095	95	240	20 x 130	200	M 20 x 70	5/20
* not part of the approval

Wedge anchor KDK-E, A4 with european technical approval ETA-05/0241

Product	Art.-No.	Clamping range	Length	Drill Ø x depth	Torque moment	Thread	Qty
		[mm]	[mm]	[mm]	[Nm]	[mm]	[St.]
KDK-E 6x40*	804 06 000	5	40	6 x 35	7	M 6 x 18	100/800
KDK-E 6-15/65*	804 06 015	15	65	6 x 50	7	M 6 x 28	100/800
KDK-E 8-5/50*	804 08 000	5	50	8 x 45	15	M 8 x 22	100/500
KDK-E 8-5/65	804 08 005	5	65	8 x 60	15	M 8 x 35	100/500
KDK-E 8-10/75	804 08 010	10	75	8 x 65	15	M 8 x 40	50/400
KDK-E 8-15/80	804 08 015	15	80	8 x 65	15	M 8 x 40	50/400
KDK-E 8-20/85	804 08 020	20	85	8 x 65	15	M 8 x 40	50/400
KDK-E 8-30/95	804 08 030	30	95	8 x 65	15	M 8 x 55	50/400
KDK-E 8-45/110	804 08 045	45	110	8 x 65	15	M 8 x 60	50/250
KDK-E 10-10/60*	804 10 000	10	60	10 x 60	30	M 10 x 25	50/250
KDK-E 10-10/80	804 10 010	10	80	10 x 70	30	M 10 x 40	50/250
KDK-E 10-15/85	804 10 015	15	85	10 x 70	30	M 10 x 40	50/250
KDK-E 10-20/90	804 10 020	20	90	10 x 70	30	M 10 x 50	25/200
KDK-E 10-30/100	804 10 030	30	100	10 x 70	30	M 10 x 50	25/200
KDK-E 10-45/115	804 10 045	45	115	10 x 70	30	M 10 x 60	25/200
KDK-E 10-70/140	804 10 070	70	140	10 x 70	30	M 10 x 75	25/125
KDK-E 10-100/170	804 10 100	100	170	10 x 70	30	M 10 x 100	25/125
KDK-E 10-140/210	804 10 140	140	210	10 x 70	30	M 10 x 100	25/125
KDK-E 12-5/75*	804 12 005	5	75	12 x 70	50	M 12 x 35	25/200
KDK-E 12-10/95	804 12 010	10	95	12 x 90	50	M 12 x 50	25/125
KDK-E 12-15/110	804 12 015	15	110	12 x 90	50	M 12 x 50	25/125
KDK-E 12-20/115	804 12 020	20	115	12 x 90	50	M 12 x 65	25/125
KDK-E 12-30/125	804 12 030	30	125	12 x 90	50	M 12 x 80	25/125
KDK-E 12-50/145	804 12 050	50	145	12 x 90	50	M 12 x 80	25/125
KDK-E 12-65/160	804 12 065	65	160	12 x 90	50	M 12 x 80	25/75
KDK-E 12-85/180	804 12 085	85	180	12 x 90	50	M 12 x 100	25/75
KDK-E 12-105/200	804 12 105	105	200	12 x 90	50	M 12 x 100	20/80
KDK-E 12-125/220	804 12 125	125	220	12 x 90	50	M 12 x 120	15/60
KDK-E 12-145/240	804 12 145	145	240	12 x 90	50	M 12 x 120	15/60
KDK-E 16-15/115	804 16 015	15	115	16 x 110	100	M 16 x 60	20/60
KDK-E 16-30/145	804 16 030	30	145	16 x 110	100	M 16 x 80	10/50
KDK-E 16-45/160	804 16 045	45	160	16 x 110	100	M 16 x 80	10/50
KDK-E 16-80/195	804 16 080	80	195	16 x 110	100	M 16 x 80	10/50
KDK-E 16-100/215	804 16 100	100	215	16 x 110	100	M 16 x 120	10/50
KDK-E 16-130/245	804 16 130	130	245	16 x 110	100	M 16 x 120	5/40
KDK-E 20-5/145*	804 20 005	5	145	20 x 130	200	M 20 x 70	5/40
KDK-E 20-35/180*	804 20 035	35	180	20 x 130	200	M 20 x 70	5/25
KDK-E 20-60/205*	804 20 060	60	205	20 x 130	200	M 20 x 70	5/25
KDK-E 20-95/240*	804 20 095	95	240	20 x 130	200	M 20 x 70	5/20
* ot part of the approval

Wedge anchor KDK-F, hot dip galvanized with european technical approval ETA-14/0269

Product	Art.-No.	Clamping range	Length	Drill Ø x depth	Torpue moment	Thread	Qty
		[mm]	[mm]	[mm]	[Nm]	[mm]
KDK-F 6x40 *	803 06 000	5	40	6 x 35	7	M 6 x 18	100/800
KDK-F 6-15/65 *	803 06 015	15	65	6 x 50	7	M 6 x 28	100/800
KDK-F 6-50/100 *	803 06 050	50	100	6 x 50	7	M 6 x 28	100/500
KDK-F 8-5/50 *	803 08 000	5	50	8 x 45	15	M 8 x 22	100/500
KDK-F 8-10/75	803 08 010	10	75	8 x 65	15	M 8 x 40	50/400
KDK-F 8-15/80	803 08 015	15	80	8 x 65	15	M 8 x 40	50/400
KDK-F 8-20/85	803 08 020	20	85	8 x 65	15	M 8 x 40	50/400
KDK-F 8-30/95	803 08 030	30	95	8 x 65	15	M 8 x 55	50/400
KDK-F 8-45/110	803 08 045	45	110	8 x 65	15	M 8 x 60	50/250
KDK-F 8-85/150	803 08 085	85	150	8 x 65	15	M 8 x 75	50/250
KDK-F 10-10/60 *	803 10 000	10	60	10 x 60	30	M 10 x 25	50/250
KDK-F 10-10/80	803 10 010	10	80	10 x 70	30	M 10 x 40	50/250
KDK-F 10-15/85	803 10 015	15	85	10 x 70	30	M 10 x 40	50/250
KDK-F 10-20/90	803 10 020	20	90	10 x 70	30	M 10 x 50	25/200
KDK-F 10-30/100	803 10 030	30	100	10 x 70	30	M 10 x 50	25/200
KDK-F 10-45/115	803 10 045	45	115	10 x 70	30	M 10 x 60	25/200
KDK-F 10-70/140	803 10 070	70	140	10 x 70	30	M 10 x 75	25/125
KDK-F 10-100/170	803 10 100	100	170	10 x 70	30	M 10 x 100	25/125
KDK-F 10-140/210	803 10 140	140	210	10 x 70	30	M 10 x 100	25/125
KDK-F 12-5/75 *	803 12 005	5	75	12 x 70	50	M 12 x 35	25/200
KDK-F 12-10/95	803 12 010	10	95	12 x 90	50	M 12 x 50	25/125
KDK-F 12-15/110	803 12 015	15	110	12 x 90	50	M 12 x 50	25/125
KDK-F 12-20/115	803 12 020	20	115	12 x 90	50	M 12 x 65	25/125
KDK-F 12-30/125	803 12 030	30	125	12 x 90	50	M 12 x 80	25/125
KDK-F 12-50/145	803 12 050	50	145	12 x 90	50	M 12 x 80	25/125
KDK-F 12-65/160	803 12 065	65	160	12 x 90	50	M 12 x 80	25/75
KDK-F 12-85/180	803 12 085	85	180	12 x 90	50	M 12 x 100	25/75
KDK-F 12-105/200	803 12 105	105	200	12 x 90	50	M 12 x 100	20/80
KDK-F 16-15/115	803 16 015	15	115	16 x 110	100	M 16 x 60	20/60
KDK-F 16-30/145	803 16 030	30	145	16 x 110	100	M 16 x 80	10/50
KDK-F 16-45/160	803 16 045	45	160	16 x 110	100	M 16 x 80	10/50
KDK-F 16-80/195	803 16 080	80	195	16 x 110	100	M 16 x 80	10/50
KDK-F 16-100/215	803 16 100	100	215	16 x 110	100	M 16 x 120	10/50
KDK-F 20-5/145 *	803 20 005	5	145	20 x 130	200	M 20 x 70	5/40
KDK-F 20-35/180 *	803 20 035	35	180	20 x 130	200	M 20 x 70	5/25
KDK-F 20-60/205 *	803 20 060	60	205	20 x 130	200	M 20 x 70	5/25
KDK-F 20-95/240 *	803 20 095	95	240	20 x 130	200	M 20 x 70	5/20
*not part of the approval

Wedge anchor KDK-U - steel, galvanized, with big washer (DIN440) with european technical approval ETA-05/0241

Product	Art.-No.	Clamping range	Length	Drill Ø x depth	Torque moment	Thread	Qty
		[mm]	[mm]	[mm]	[Nm]	[mm]
KDK-U 12-85/180	812 12 085	85	180	12 x 90	50	M 12 x 100	25/75
KDK-U 12-105/200	812 12 105	105	200	12 x 90	50	M 12 x 100	15/60
KDK-U 12-125/220	812 12 125	125	220	12 x 90	50	M 12 x 120	15/60
KDK-U 12-145/240	812 12 145	145	240	12 x 90	50	M 12 x 120	15/60
KDK-U 12-160/255	812 12 160	160	255	12 x 90	50	M 12 x 120	15/60
KDK-U 12-190/285	812 12 190	190	285	12 x 90	50	M 12 x 120	10/60
KDK-U 12-230/325	812 12 230	230	325	12 x 90	50	M 12 x 120	10/40
KDK-U 12-260/355	812 12 260	260	355	12 x 90	50	M 12 x 120	10/40
KDK-U 16-80/195	812 16 080	80	195	16 x 110	100	M 16 x 80	10/50
KDK-U 16-100/215	812 16 100	100	215	16 x 110	100	M 16 x 120	10/50
KDK-U 16-130/245	812 16 130	130	245	16 x 110	100	M 16 x 120	5/30
KDK-U 16-165/280	812 16 165	165	280	16 x 110	100	M 16 x 120	5/30
KDK-U 16-200/315	812 16 200	200	315	16 x 110	100	M 16 x 120	5/30

Wedge anchor KDK-UE A4, mit european technical approval ETA-05/0241, DIN9021

Product	Art.-No.	Clamping range	Length	Drill Ø x depth	Torque moment	Thread	Qty
		[mm]	[mm]	[mm]	[Nm]	[mm]
KDK-E A4 8-145/210-U	816 08 145	145	210	8 x 65	15	M 8 x 85	150
KDK-E A4 8-175/240-U	816 08 175	175	240	8 x 65	15	M 8 x 85	150
KDK-E A4 8-205/270-U	816 08 205	205	270	8 x 65	15	M 8 x 85	150
KDK-E A4 8-235/300-U	816 08 235	235	300	8 x 65	15	M 8 x 85	150
KDK-E A4 8-285/350-U	816 08 285	285	350	8 x 65	15	M 8 x 85	100

Wedge anchor KDK-UE A2

DIN9021

Product	Art.-No.	Clamping range	Length	Drill Ø x depth	Torque moment	Thread	Qty
		[mm]	[mm]	[mm]	[Nm]	[mm]
KDK-UE A2 8-145/210	802 08 145	145	210	8 x 65	15	M 8 x 85	150
KDK-UE A2 8-175/240	802 08 175	175	240	8 x 65	15	M 8 x 85	150
KDK-UE A2 8-205/270	802 08 205	205	270	8 x 65	15	M 8 x 85	150
KDK-UE A2 8-235/300	802 08 235	235	300	8 x 65	15	M 8 x 85	150
KDK-UE A2 8-285/350	802 08 285	285	350	8 x 65	15	M 8 x 85	100

Wedge anchor

inner thread KDK-IG

Product	Length	Drill Ø x depth	Thread	Steel galvanized	Stainless steel	Qty
	[mm]	[mm]	[mm]	Art.-Nr.	Art.-Nr.
KDK-IG M6	45	8 x 60	M 6x15	861 06 045	864 06 045	100/800
KDK-IG M8	50	10 x 65	M 8x15	861 08 050	864 08 050	100/800
KDK-IG M10	60	12 x 75	M 10x20	861 10 060	864 10 060	50/400
KDK-IG M12	75	16 x 95	M 12x25	861 12 075	864 12 075	25/125

Drop-in anchor SAK - steel, galvanized approval ETA-11/0163

Drop anchor SAK zinc-plated and in stainless steel A4 *. Approved for anchoring in non-cracked concrete and for fastening light ceiling linings.

How it works: After inserting it into the borehole, the tip of the anchor is spread with a setting tool. The screw or threaded rod is then screwed into the internal thread.

Areas of application: For fastening z. E.g .: suspensions, pipes, ventilation lines, rails, sprinkler systems, consoles, steel structures, grilles, cable trays, gates, facades or suspended ceiling cladding.

Properties: Drop anchors are suitable for all screws and threaded rods with a metric thread. The low setting depth reduces the drilling time and enables more cost-effective assembly. The flush setting is particularly noticeable for series fastenings with the same threaded rod length.

After hammering in, the fastening can be removed several times as the anchor itself remains in the drill hole.

Product	Drill-Ø	Drill depth	Thread-Ø	Length	Art.-No.	Qty
	[mm]	[mm]	[mm]	[mm]
SAK 6*	8	28	6	25	821 06 000	100/1000
SAK 8	10	33	8	30	821 08 000	100/1000
SAK 8x40*	10	43	8	40	821 08 040	100/1000
SAK 10	12	44	10	40	821 10 000	100/800
SAK 12	15	54	12	50	821 12 000	50/400
SAK 12*	16	54	12	50	820 12 000	50/400
SAK 16	20	71	16	65	821 16 000	25/200
SAK 20*	25	86	20	80	821 20 000	10/100
* not part of the approval

Drop-in anchor SDK-K with collar - steel, galvanized

Product	Drill-Ø	Drill depth	Thread	Length	Art.-No.	Qty
	[mm]	[mm]	[mm]	[mm]
SDK-K 12	15	50	12	50	825 12 000	50/400
SDK-K 16	20	65	16	65	825 16 000	25/200

Drop-in anchor SDK-E, stainless steel A4

Product	Drill-Ø	Drill depth	Thread-Ø	Length	Art.-No.	Qty
	[mm]	[mm]	[mm]	[mm]
SDK-E 6*	8	28	6	25	823 06 000	100/1000
SDK-E 8*	10	33	8	30	823 08 000	100/1000
SDK-E 10*	12	44	10	40	823 10 000	50/400
SDK-E 12*	15	54	12	50	823 12 000	50/400
SDK-E 16*	20	71	16	65	823 16 000	25/200
*Not part of the approval

Setting tool SA for Drop-in anchor

Product	Art.-No.	Qty
SWK-SA 6	829 06 000	1
SWK-SA 8	829 08 000	1
SWK-SA 10	829 10 000	1
SWK-SA 12	829 12 000	1
SWK-SA 16	829 16 000	1
SWK-SA 20	829 20 000	1